Ramsey REP-6000 Winch

From Jurassic Auto Group Reference Wiki
Revision as of 20:54, 29 February 2020 by Dwight (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

The REP6000 Ramsey Winch was used on all the Jurassic Park Jeeps. Some of the main components typically required to restore a winch to its former glory include a new cable, tie-rods, and decals.

The winch is mounted to a winch plate, which is then installed onto the front of the Jeep. A good winch plate can be purchased from Harbor Freight. You will spacer blocks or a stack of washers on the underside of the winch plate in order to make room for installing. On the winch plate, there is also a fairlead.

Furthermore, there are custom tow-hooks that are attached to the winch plate as well.

Retrieved from "http://www.jurassicautogroup.com/wiki/index.php?title=Ramsey_REP-6000_Winch&oldid=131"